<span id="b1j3p"></span><span id="b1j3p"></span>
<span id="b1j3p"><i id="b1j3p"></i></span><strike id="b1j3p"></strike>
<strike id="b1j3p"></strike>
<span id="b1j3p"></span>
<strike id="b1j3p"></strike>
<span id="b1j3p"></span>
<strike id="b1j3p"></strike>
<span id="b1j3p"></span>

+86-0755-27204324

+86-18665940800

CN

News

Improving customer value as the driving force for company development

Here are accurate industry information and technical data, I believe you can find interesting content here

Industry Information

How to operate a children's smart watch?
Release time:2022-01-12      Hit count:740

Step 1

First, learn how to turn on and off a watch. When the watch is turned off, pressing the phone button for more than 2 seconds can turn on the watch. When the watch is turned on, pressing the phone button and intercom button simultaneously for more than 2 seconds can turn off the watch.

Step 2

In the shutdown state, insert the phone card according to the instructions on the phone card plug on the left side of the watch. It should be noted that Uber watches currently only support Micro SIM cards (12x15mm) from China Mobile and China Unicom × 0.8mm, commonly known as a medium card (which is the size of the middle circle of a three in one phone card), when inserting a card, the chip is facing upwards. To avoid card recognition faults, it is recommended not to use old cards, cut cards, or card holders. The card in the watch must have access to traffic (20M per month is enough) and Caller ID.

Step 3

The watch starts and automatically completes registration. After the new watch is first installed and turned on, it will complete automatic registration on the mobile network, which usually takes 2-3 minutes in areas with good signal. Confirm the successful registration by pressing the Session key. If the prompt "Homegroup not created" is prompted, the registration is successful. If the prompt "Synchronizing information" is prompted, the registration is not completed or failed due to insufficient signals.

Step 4

Download and install the app (you can scan the QR code at the bottom of the product packaging, or search for "Ubi Smart Watch" in the app market), and complete the registration of the app on your phone (please use the number on your phone to obtain the verification code when registering)

Step 5

Add a watch in the app, open the mobile app, click Add Watch, follow the steps to complete, and set the management password. The first phone bound to the watch has the highest management permissions and can perform contact book operations. The phone bound to the watch later cannot edit the contact book.

Step 6

Set up a phone book in the app, which can have 20 numbers, including 5 numbers that can be set as emergency call numbers and 5 numbers that can be set as one-way listening numbers. When setting up phone numbers, if there is a short number (family number, family package, primary and secondary cards, etc.), a short number must be set.

Step 7

After 1-2 minutes, check the phone book of the watch. Press the phone button to check the phone book. If the phone book that was just set can be displayed on the watch, then normal calls can be made. Numbers that are not in the watch's address book cannot communicate with the watch. Calling a watch call from a number that is not in the watch's address book will indicate that a call is in progress.

Step 8

When calling a phone from a watch, in the standby interface, long press the voice button. After the microphone appears, say the contact person's name, and then release your hand to make a call. To avoid recognition errors, it is usually advisable to maintain a distance of 20-30cm when speaking to a watch. If the distance is too close to the watch, the explosive sound will affect the watch's recognition of voice commands.

News you are interested in
Previous:What are the functions of a children's smartwatch?
Next:NO!

Back to list

av在线播放一级二级三级,毛片毛片毛片,免费永久国产在线视频,中文字幕乱老妇女一视频
<span id="b1j3p"></span><span id="b1j3p"></span>
<span id="b1j3p"><i id="b1j3p"></i></span><strike id="b1j3p"></strike>
<strike id="b1j3p"></strike>
<span id="b1j3p"></span>
<strike id="b1j3p"></strike>
<span id="b1j3p"></span>
<strike id="b1j3p"></strike>
<span id="b1j3p"></span>